Preventative Maintenance Plans
Premium Service Plans for Ducted Systems
<< Scroll sideways to view more >>
| PROGRAM BENEFITS | Comfort Club | Diamond Plan |
|---|---|---|
| Proactive Preseason Scheduling |  |
|
| Maintenance Service Reminder | |
|
| Ductless System Maintenance | |
|
| Priority On-Site Service Response Time | Front of the Line | 24 Hour |
| Diagnostic Service Fee | 50% Discount ($87 Value) |
Waived |
| After Hours Fee | 50% | Waived |
| Maintenance Inspection | 21-Point Inspection | 21-Point Inspection |
| High-Performance Filter Replacement | 12-mo. supply of filters | 12-mo. supply of filters |
| Accessories | - | 15% Discount |
| Accrual Credit (toward future system upgrade) |
- | $100/year |
| Repair Warranty | 90 Day | Life |
| Parts and Labor Coverage | 25% Discount | 100% Discount |
| Blower Wheel Cleaning | - | Included* ($377 Value) |
| Coil Cleaning | - | Included* ($298 Value) |
| Condensate Pump Cleaning- | Included* ($191 Value) | |
| Thermostat Warranty (same or similar replacement value) |
- | Lifetime Warranty |
| Ductless System Maintenance | $29.95/mo for heat and cool $19.95/mo for heat only |
$45/mo for heat and cool $30/mo for heat only |
*Condensate pumps, electronic air cleaners, humidifiers, and other nonfactory accessories are not included in parts coverage but are available at a 15% discount. Diamond Plan includes cleaning of blower wheel, coil, and condensate pump is performed as needed.
A $500 credit will go towards a heat exchanger or compressor if failed after purchase of new equipment.
Standby Generator Maintenance Plan
Comprehensive Generator Maintenance Visit Includes:
• Drain and Replace Engine Oil
• Replace Engine Oil Filter
• Replace Engine Air Filter
• Check and Clear Air Inlets and Outlets
• Check Battery Posts, Cables, and Chargers (for loose connections, corrosion, and damage)
• Check and Clean Spark Arrestor
• Check Engine Fan Belts
• Clean and Replace Engine Spark Plug (if necessary)
• Check Valve Clearance
• Clean and Check Generator (for corrosion, insect, and/or rodent damage)
• Check Electric and Gas Conduits
• Start and Operate System (checking for leaks, loose connectors or components, and abnormal operating conditions)
• Initiate Automatic Start and Transfer Load (customer approval required)
• Adjust Frequency and Voltage (if necessary)
• Return Unit to Standby Setup (for full-emergency operation)
$35/month +tax
ANY ADD-ON CAN BE SOLD AS A STAND-ALONE PLAN AND
WILL CARRY OVER THE BENEFITS OF THE COMFORT CLUB PLAN.
Water Heater Maintenance Plans
Comprehensive Maintenance Visit Includes:
CONVENTIONAL WATER HEATER
• Check Water Pressure (to ensure it is below 80 psi)
• Check Valves (looking for possible leaks on pipes and joints)
• Test Pressure and Pressure Relief Valve for Proper Operation
• Test Expansion Tank for Proper Pressure
• Flush Water Heater Tank (to drain any sediment buildup)
• Check Anode Rod (to ensure there is corrosion protection)
• Refill Water heater Tank and Purge Plumbing System (to remove air pockets)
• Retest Expansion Tank Pressure
• Relight Pilot (if gas powered) and Test Operation
• Inspect Venting and Exhaust
• Inspect All Fittings for Gas Leaks
• Check to Ensure Sediment Trap Is Installed (per IFGC 408.4 Specs)
$11/month +tax
ANY ADD-ON CAN BE SOLD AS A STAND-ALONE PLAN AND
WILL CARRY OVER THE BENEFITS OF THE COMFORT CLUB PLAN.
TANKLESS WATER HEATER
• Flush Unit (to remove scale)
• Check Piping and Connections for Leaks
• Check Interior Components (against manufacturer specifications)
• Check for Proper Installation and Venting
• Check Safety Shutoff Valves and Sewer Clean outs
• Clean Sediment Screens
• Test Discharge Water Temperature
$25/month +tax
ANY ADD-ON CAN BE SOLD AS A STAND-ALONE PLAN AND
WILL CARRY OVER THE BENEFITS OF THE COMFORT CLUB PLAN.